North Carolina's Commercial Roofing SOLUTIONS

Get Your FREE Roofing Estimate Now!

Get Your FREE Roofing Estimate Now!

See Our Metal Restoration Roof Repair System In Action

Spray Foam Commercial Roofing System Application

Conklin Commercial Roofing Steps.

Step 1 :

Prepare roof surface to specification

STEP 2 :

Apply SPF with a minimum thickness of one inch

STEP 3 :

Coat foam surface with appropriate roof coating

Industry Leading Cool White Roofing

Commercial roofing example of cool roofing.
them
them1 scaled

Our revolutionary commercial roofing systems are energy star rated and are shown to save money on your monthly utility bills. Conklin Company is proud to be a partner of the EPA’s ENERGY STAR program; our white roof systems meet the EPA’s stringent guidelines for energy efficiency, and help to protect the environment in a number of ways

Fabric Reinforced Commercial Roofing

System Application

fabricreinforcedprocess

Step 1 :

After proper cleaning and application of appropriate primer, Spunflex® is embedded into the base coat, over the seams, and at the penetrations.

STEP 2 :

Fabric is embedded into another layer of the base coat them applied in overlapping sheets over the entire roof to form a seamless, monolithic surface.

Top NOTCH reflectivity barrier

Highly reflective “cool” roofs are having their day in the sun. During the warmest weather, studies have indicated that they lower roof temperatures by up to 40% and decrease the amount of heat transferred into a building’s interior. That helps reduce energy needs for cooling, and using less energy not only saves money, it also reduces the amount of pollutants released into the atmosphere. Our commercial roofing systems meet the very highest standards for energy efficiency.

  • Reduce air conditioning bills
  • Increase roof durability
  • Lower air temperature surrounding air conditioning unit
  • Help lower the heat island effect
  • Provide sustainable roofing systems
  • Reduce the amount of landfill waste by re-coating the existing roof

Metal Restoration Commercial Roofing Application

Step 1 :

Power wash & clean with rust off

STEP 2 :

Prime with Conklin Encase® metal primer

STEP 3 :

Kwik Kaulk® all fastener heads

mrrestoprocess

Step 4 :

Reinforce existing seams with Spunflex® or Butyl tape and base coat

STEP 5 :

Seal entire roof with one of our approved acrylic coatings

STEP 6 :

Completed project

Exceptional emissivity and reflectivity

The outside temperature doesn’t have to be hot for Our Roofing Systems to reduce energy costs. Our Spray Polyurethane Foam (SPF) Roof Systems and Single-Ply Membrane Roofing Systems have a layer of insulation that helps lower heating costs in the winter. With white, reflective coatings to reflect summer heat, Our roofs are energy efficient all year round.

  • Lowers roof temperatures, reducing the rate of chemical breakdown
  • Reflects damaging UV rays to help slow the aging process of the roof
  • Reduces severe temperature fluctuations that cause thermal movement and stress

Single Ply Membrane Commercial Roofing

System Application

Step 1 :

Securely attach appropriate board stock

STEP 2 :

Apply membrane, overlapping in the direction of water run-off

singleplyprocess

Step 3 :

Weld seams by hand or with robotic welder

STEP 4 :

Seal free edges of membrane with urethane sealant

Cool Roofs Lower Heating Costs

When the Florida Solar Energy Center decided to conduct a demonstration of the energy savings resulting from light-colored roofs, it looked for a product it believed would lower cooling costs during the hot Florida summer. The product it selected was Conklin’s Benchmark® roof coating. Benchmark was applied to the roofs of seven retail shops in a Cocoa, Florida, strip mall. The results of the demonstration showed a 25.3% average reduction in cooling energy among the seven shops. Individual savings ranged from 13% to 48%.

  • Decreasing the energy required to cool the building, resulting in less air pollution
  • Reducing the amount of roofing materials discarded into landfills with exceptional sustainability
  • Minimizing summertime heat island effects in city environments, slowing down the formation of smog

Membrane Coating Commercial Roofing System Application

Step 1 :

Securely attach appropriate board stock

STEP 2 :

Apply membrane, overlapping in the direction of water run-off

membranecoatingprocess

Step 3 :

Weld seams by hand or with robotic welder

STEP 4 :

Seal free edges of membrane with urethane sealant

Click here to check out our service area!

Contact Us Google Maps Image.

Get Your New Roof Today!

We will come out and give you a free no obligation estimate for your roofing!

Simply click below to schedule for us to come and inspect the roofing to be done.